KrikFix™ 2.0 DIY Lifting and Positioning Tool Series | 5 Models

Choose the Right Lift Range, Then Get the Last Millimeters Right

Good installation work often comes down to one awkward moment: holding a door, cabinet section or panel at exactly the right height while you level, shim or fasten it. KrikFix™ 2.0 turns that struggle into a controlled adjustment. Choose from three compact silver models for close fitting work, or the black 188 and 288 long-guide versions when extra travel matters.

Precision Help for the Jobs That Usually Need a Second Pair of Hands

Set the base on a firm, level surface, stabilize the workpiece and squeeze the handles in small steps. On the compact silver versions, the load belongs on the two small raised support ridges at the very front of the moving plate, never against the vertical rail. Instead of repeatedly lifting, guessing and setting the piece down again, you can work toward the right position with far more control.

Five Versions, One Clear Job: Controlled Positioning

• 3.54, 3.94, 4.33 or 7.87 in lift options: Choose compact travel for close fitting or a longer guide when your project needs more vertical adjustment.
• Compact silver choices: Three compact versions for fitting and leveling on a firm, level surface.
• Controlled squeeze adjustment: Pull the silver lever toward the fixed padded grip to raise the moving support in deliberate increments.
• Quick-release lowering: The top release plate lets you reduce the height gradually once the workpiece is secured or shimmed.
• All-steel and long-guide builds: Select a compact silver structure or the black 188 and 288 bodies with visibly longer guide rails.
• Made for fitting and leveling: Useful for interior doors, cabinet sections, timber panels, boards and tiles where a small height correction makes the difference.

Which KrikFix™ 2.0 model fits your project?

• All-Steel | 3.54 in Lift: Compact silver all-steel build for close fitting.
• Solid All-Steel | 3.54 in Lift: Compact silver solid all-steel build for close fitting.
• Compact Plus | Up to 4.33 in Lift: Compact silver build with up to approximately 4.33 in of adjustment.
• Model 188 Long Guide | 3.94 in Lift: Black long-guide build with approximately 3.94 in of travel.
• Model 288 Extra-Long Guide | 7.87 in Lift: Black extra-long-guide build with approximately 7.87 in of travel.

KrikFix™ 2.0 Specifications

• Product type: Manual lifting and positioning tool
• Material: Steel lifting structure; finish and handle design vary by model
• Operation: Manual squeeze handles and release control; no batteries required
• Suitable for: Temporary positioning of doors, cabinet sections, panels and boards during fitting or leveling
• Compact-model contact: Position the workpiece on the two raised front support ridges, clear of the vertical rail and mechanism
• In the box: One tool in the selected version
• Use: Keep the base on a firm, level surface, stabilize the workpiece and use suitable secondary support. Not for people, vehicles, overhead loads or permanent support.

Frequently Asked Questions About KrikFix™ 2.0

Which version should I choose?
Choose a compact silver version for close fitting, or a long-guide version when more vertical adjustment is needed. Compare the lift ranges in the selector.

What does the lift measurement mean?
It describes the approximate adjustment range of the selected model. Allow for positioning and measurement tolerances.

How do I position the workpiece?
On compact silver models, use the two raised support ridges at the front of the moving plate. Keep the workpiece clear of the vertical rail and moving mechanism.

Can the tool hold a wide panel on its own?
Wide or unbalanced workpieces may need another positioning aid and suitable secondary support. Do not use the tool as permanent support.

Does it need power?
No. Adjustment is manual.

How do I lower it?
Secure or shim the workpiece first, then operate the release gradually while keeping the load stable.